PLACEMENT OF PLEAT AT CENTER FRONT

NOTE! If you have a full bust, the pleat at center front will have to be replaced and lowered. This will give a fine and flattering look.   

1. Move the pleat

  • Draw a line on the sample, where the pleat has to be placed. NOTE! The pleat can be moved MAX 3 cm.
  • Measure down on the pattern at center front line and place new notches. Both notches are moved the same amount. The red lines on the picture below are the new notches. 

2. Extend the neckline

  •  Move the neckline down to the new notch, see picture below.